Tim
NAC engineer
Recent appliances
- Fridge Freezers
- Washing Machines
- Ovens
- Dishwashers
- Range Cookers
Recent brands
- Bosch
- Hotpoint
- Neff
- Samsung
Recent areas
- Warrington
- Northwich
- Chester
When a washing machine, oven, fridge or dishwasher stops playing fair, our fully trained engineers get it working again across Runcorn, often the same or next working day. You'll have a fixed service charge before we attend, covering all labour and callout, and every repair we complete is backed by a guarantee.
Every figure here comes straight from our Runcorn job records, not a marketing brochure.
These are the breakdowns that bring our engineers out to Runcorn homes most often.
A failed element, thermostat or grill unit stops an oven or dryer reaching temperature. We test and replace the part at fault.
The control board flags a fault and halts the cycle, often a door lock or sensor issue. We read the code and trace the cause on the visit.
A blocked pump or filter, a snapped belt or a tap symbol flashing usually stops water clearing. We clear the blockage or fit the worn part.
Perished door seals, split hoses or a cracked container let water escape under the machine. We find the source and renew the seal or hose.
Worn drum bearings or a loose object cause grinding, banging or a sudden loud rattle on spin. We strip it down and replace what's worn.
A faulty thermocouple or flame sensor lets the hob or oven flame drop once the knob is released. We test and fit the safety part.
Fault shares and service-charge ranges are drawn from our Runcorn job records over the last 24 months. Parts, where needed, are quoted separately before any work starts.
Our fully trained engineers work across every major brand, from Bosch and Hotpoint to Samsung, Beko and Miele. Whatever's stopped working, the chances are we cover it, and we carry the common spares to fix many faults on the first visit.
Drum bearings, pumps, door locks and control boards put right on a single visit.
Heating elements, belts, sensors and drum faults sorted across vented and condenser types.
Elements, fan motors, thermostats and door hinges tested and replaced where needed.
Gas, ceramic and induction hobs traced and fixed, from ignition faults to error codes.
Cooling, fans, thermostats, seals and ice dispensers diagnosed and repaired.
Drainage, heating, spray arms and inlet faults cleared so dishes come out clean.
Book before about 3pm and an engineer will usually be with you the next working day, sometimes the same day.
Each completed repair is covered by a written guarantee, with the length set by the parts we fit under our terms.
You agree a fixed service charge before we attend, covering all labour, callout and VAT. Only parts cost extra, quoted first.
Our engineers are trained across every major brand and appliance, fully insured and ready to fix the fault on site.
NAC engineer
Recent appliances
Recent brands
Recent areas
NAC engineer
Recent appliances
Recent brands
Recent areas
NAC engineer
Recent appliances
Recent brands
Recent areas
Don't just take our word for it. Every review below comes from a real NAC customer and is independently verified by Trustpilot, including plenty of people right here in Runcorn.
Very fast service from start to finish, amazing customer service. The technician Andy was very polite and professional, very knowledgeable and rectified the problem very quickly. I would highly recommend this service, thank you very much.
Cannot fault the service I received. The engineer did not find a fault on my washer. He was very helpful and explained how water was coming in, which appeared to be the washing machine causing a leak. Problem solved.
Engineer arrived on time, explained what he was doing, was very professional and friendly in attitude, tidy in his work. Would definitely use this service again.
He came when he said and was very professional in what he did, quickly and cleanly.
Extremely efficient and courteous. Work carried out quickly and no mess left.
Repair was logged easily for next day. The date had to be changed due to engineer workload. Andy arrived the following day after keeping me fully updated, diagnosed the fault and replaced the faulty water pump during the visit. Good price including part costs, would absolutely use again.
The initial contact was polite, with the relevant information collected and the visit date organised. The visit was on time and the problem fixed efficiently by the engineer, who was courteous and tidy. An excellent service.
Quick response and attendance. Friendly engineer who explained the issues.
The engineer was very good. Could not fix the problem as it needed a new drum, but the diagnosis was clear and honest.
Bean-to-cup, pod and espresso machines from De'Longhi, Jura, Sage, Gaggia and more - repaired in your Runcorn home by the same engineers you'd trust with your washing machine.
Would you rather not call? Book online, get a free repair quote in under 60 seconds and confirm your engineer visit there and then, without speaking to anyone.
NAC-Prime members get priority same or next-day visits, money off every repair, free delivery on any parts we fit and a yearly maintenance check across all your kitchen appliances.
A few things Runcorn homeowners ask us before they book. If your question isn't here, give the team a ring and we'll talk it through.
Get a fixed-price service charge in a couple of minutes online, or talk it through with our UK booking team on 01928 249 461.